Electroválvula ST-SB 1/4'' NO latón FKM 0-10bar 12V CC
4.9 (308) · € 31.50 · En stock
Comprar una válvula de solenoide ST-SB 1/4'' NO latón FKM 0-10bar 12V DC en línea de Tameson hoy. Envío el mismo Día con opciones de envío global.
Válvula solenoide de 2 vías JP Fluid Control (tipo ST-SB) con roscas G 1/4 pulgadas y una bobina de 12 V CC. La función de circuito de la electroválvula es normalmente abierta (tensión = cierre) y de funcionamiento semidirecto, por lo que no se requiere diferencial de presión. Adecuado para una temperatura máxima del medio de 120° C (248 ° F) y un rango de presión de 0 - 10 bar (0 - 145 psi). Cuerpo de latón con junta de FKM (FPM) y orificio de 10,5 mm. El valor Kv es de 1,25 m3/h (20,84 l/min a dp=1 bar de agua).
Solenoid Valve ST-SA 1/2 brass FKM 0-10bar 12V DC
Shut-off Valve, 12V DC solenoid, 1/4 female NPT ports, normally closed, TEFLON SEALS, 150 PSI operating - Kinsler Fuel Injection
Tarifa de Precios - Control y Regulación - Calor - Salvador Escoda SA
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable stainless steel body, two-way inlet and outlet ports with one-quarter inch (1/4 inch) female threaded (NPT) connections, and heat and oil resistant Viton seals. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.
U.S. Solid 1/4 Stainless Steel Electric Solenoid Valve 12VDC Normally Closed Viton
Lelinta Automatic Transmission at Kickdown Solenoid Valve Body Module Auto Transmission Valve Body with Solenoids for Aud-i VW Jetta Golf Passat
El Catalogo de las Soluciones 2015/16 by Idrobase Group - Issuu
El catalogo de las soluciones 2017/18 by Idrobase Group - Issuu
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4 inch) female threaded (NPT) connections, and heat and oil resistant Viton seals. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.
U.S. Solid 1/4 inch NPT Brass Electric Solenoid Valve DC 12V Viton Direct Normally Closed
1-1/4'' inch 12V DC Electric Brass Solenoid Valve 12-Volts
